Hydraulic Jack - Get to know more about its function and how it works in cars

 

Hydraulic Jack - Get to know more about its function and how it works in cars

This hydraulic jack is one of the most important tools that is often used to lift vehicles such as cars to make them safer and more efficient. This article will explain in depth the functions, components and workings of the hydraulic jack which is also used in cars.

 

What is a Hydraulic Jack?

This hydraulic jack is a tool that is very often used to lift vehicles using the principle of fluid pressure. Usually this tool is used to change tires or carry out maintenance under the car. This jack works by generating hydraulic pressure through a pump connected to a tube containing hydraulic fluid. This pressure will also allow the piston to move up and lift the platform that supports a vehicle.

 

The advantage of a hydraulic jack is its ability to lift heavy loads stably and safely, and its use is much easier compared to conventional mechanical jacks. Apart from that, these users must also be able to understand how to use it correctly and properly and carry out maintenance to maintain the safety and performance of this tool.

 

Hydraulic Jack Function

A hydraulic jack functions to lift vehicle parts that require repair or maintenance, such as changing tires or carrying out maintenance under the vehicle. Its function is to lift the car using hydraulic pressure to support the weight of the car.

 

Hydraulic Jack Components

• Hydraulic Pump: The hydraulic pump is the part of the jack that produces hydraulic pressure. This pump can be an integrated part with a jack or can be operated separately using a lever or handle.
• Hydraulic Tube: The hydraulic tube is the part where hydraulic fluid (usually oil) is stored and compressed to create the pressure necessary to lift the vehicle.
• Piston: The piston is the component that moves inside the hydraulic tube when hydraulic pressure is applied. This piston is connected to a platform or plate used to support the vehicle.
• Valve: The valve (valve) in the hydraulic jack regulates the flow of hydraulic fluid to control the movement of the piston and platform safely and efficiently.
• Handle or Lever: On some hydraulic jack models, there is a handle or lever that is used to operate the hydraulic pump and adjust the height or position of the platform.

 

How a Hydraulic Jack Works

The working process of a hydraulic jack can be described as follows :

• Preparation: Before lifting the vehicle, make sure the area around the jack is clean and level. Place the jack below the lifting point recommended by the car manufacturer, usually near the tire to be replaced or under a sturdy vehicle frame.
• Height Adjustment: Adjust the position of the handle or lever on the jack to ensure the piston is in the lower position. This allows you to adjust the height of the platform as needed.
• Hydraulic Pump: Use the handle or lever to pump the hydraulic pump. As the hydraulic pressure increases, the piston will begin to rise in the hydraulic tube.
• Lifting the Vehicle: When the piston rises, the platform or plate connected to the piston will slowly lift the vehicle. Be sure to continuously monitor the vehicle's position while it is being lifted to ensure stability and safety.
• Lowering the Vehicle: After you have finished using the jack, slowly control the lowering of the vehicle by gradually releasing the hydraulic pressure using a handle or lever. Make sure not to lower the vehicle too quickly to avoid injury or damage to the vehicle.

 

Safety of Using Hydraulic Jacks

• Make sure the jack is placed on a flat, firm surface.
• Use the jack only to lift the vehicle before using additional safety devices such as jack stands.
• Never lift a vehicle more than the maximum capacity recommended by the jack manufacturer, as this is extremely dangerous.
• Always check the condition of the jack periodically and be sure to maintain it according to the instructions provided by the manufacturer.

 

The Importance of Hydraulic Jack Maintenance

• Be sure to clean the jack after use to remove dust and dirt that may interfere with performance.
• Check the hydraulic pressure regularly and ensure there are no leaks in the tubes or valves.
• The hydraulic oil needs to be changed according to the manufacturer's recommendations to ensure optimal viscosity.
• Store the jack in a dry and clean place to prevent corrosion and moisture damage.

 

Conclusion

The hydraulic jack itself is a very important tool in the automotive world for lifting vehicles safely and more efficiently. By understanding the functions, components, how they work, as well as the steps for correct use and maintenance.

 

Apart from that, these drivers can also ensure the safe use of this hydraulic jack for various vehicle maintenance needs. It is also important to follow the instructions for use and check the condition of the jack to ensure its reliability and safety during use.

Also read information about Tours and Traveling? ==> Read more